Florida Certified Roofing Contractor CCC 1334537
Metal Roof in Boulevard Gardens, FL
Metal Roofing for homes in Boulevard Gardens and the surrounding area — from our Sunrise headquarters. Free quote.
Boulevard Gardens is a small unincorporated community of roughly 1,700 people in Broward County, sitting about five miles inland from the Atlantic. That inland position does not spare roofs from salt-laden air, and the hot, humid subtropical climate — summer dew points in the 70s, afternoon thunderstorms from June through September — keeps moisture working on fasteners, flashings and drip edge year-round. Because Broward is inside the High-Velocity Hurricane Zone, wind uplift at edges and ridges is the design problem that drives every decision on a metal roof here.
Flat Rate Roofing Inc installs metal roof systems in Boulevard Gardens from our office at 9610 NW 24th St in Sunrise, also in Broward County. We install standing seam panels with concealed fasteners, exposed-fastener metal panels, and aluminum or galvalume finished for coastal exposure, with hip, ridge and valley detailing formed on site. Every job starts with a free estimate and a written flat rate quote that says what is included, and we pull the permit under our own license.
The housing stock here is predominantly modest post-war single-family homes built from the 1940s through the 1960s, with concrete block and stucco walls and low-slope or shallow-gable roofs, plus duplexes and small multi-family buildings mixed in. On a shallow-gable or partly low-slope roof, panel selection and underlayment matter as much as the metal itself — wind-driven rain from a squall line will find any flashing detail that was never built for it. Because this is one of Broward's older unincorporated pockets, a large share of structures predate modern Florida wind-load codes, so a metal re-roof is usually also the moment the deck, fastening pattern and edge metal get brought up to current requirements. Carports are at least as common as enclosed garages in this area, and those attached low-slope sections need their own flashing and termination details where they meet the main roof or a block wall.
Problems to watch for in Boulevard Gardens
Salt-air corrosion on fasteners and flashings
Even five miles inland, Broward air carries salt that attacks unprotected metal, drip edge and fasteners. Material selection and fastener compatibility are what keep a coastal metal roof from failing at the small parts first.
Hurricane uplift at edges and ridges
Perimeter and ridge zones take the highest uplift pressures during a tropical system, and hurricanes and tropical storms are the dominant severe-weather threat here. Attachment at those zones has to match the approved system, not a generic pattern.
Fastener backout from thermal movement
Metal panels expand and contract daily under Florida heat, and exposed-fastener systems can work screws loose over time. Concealed-fastener standing seam is designed to let panels move without dragging on every screw.
Flashing failures at penetrations
Skylights, vents and wall terminations are where wind-driven rain gets in during an afternoon storm. These details need to be formed and sealed as part of the system rather than patched later.
Oil-canning from poor deck preparation
Waviness in flat panel areas usually traces back to an uneven or deteriorated deck. On 1940s-to-1960s homes, decking often needs correction before panels go down.
Deteriorated plywood and fascia
Decades of humidity and attic moisture can soften sheathing and fascia on older Boulevard Gardens roofs. Rotten plywood and fascia replacement is included in our scope so it does not become a surprise mid-job.
Low-slope sections treated like steep slope
Many homes here have shallow-gable or low-slope areas, including over carports and additions. Those areas need underlayment and panel choices appropriate to the pitch.
What we do
- Standing seam with concealed fastenersPanels are seamed with no exposed screws across the field, which removes a major corrosion and backout path. We detail hips, ridges and valleys on site to fit the actual roof.
- Exposed-fastener metal panelsA straightforward panel option for suitable structures and slopes. Fastener type and spacing follow the approved system for Broward wind exposure.
- Aluminum and galvalume for coastal exposureWe specify finishes intended for salt-air environments and pay attention to fastener compatibility so dissimilar metals are not left in contact.
- High-temperature underlayment and dry-inMetal roofs run hot, so the layer beneath has to hold up. Dry-in is inspected before panels are installed.
- Tear-off, deck repair and flashingWe remove the old covering, replace rotten plywood and fascia, and form flashing at skylights, vents and wall terminations. Full cleanup is part of the job.
Licenses, permits and codes in Boulevard Gardens
Metal roofing is roofing work and generally requires a DBPR-licensed roofing contractor in Florida. Licensing runs through the Florida Department of Business and Professional Regulation and its Construction Industry Licensing Board, and local boards — including the Broward County Central Examining Board of Building Construction Trades — also play a role for registered and specialty contractors. Flat Rate Roofing Inc holds Florida Certified Roofing Contractor CCC1334537, a state certification valid in every Florida county and verifiable on the DBPR website, and the company is insured. A permit from the local building department is typically required, with inspections for deck condition, fastening and dry-in. Florida Building Code panel attachment, uplift and underlayment provisions apply, metal roof systems require Florida Product Approval, and because Boulevard Gardens is in Broward County and therefore the High-Velocity Hurricane Zone, Miami-Dade NOAs are commonly required as well. Certain metal building or structural work can fall under other license categories, so confirm scope with DBPR or the Broward building department.
When to call
Interest in roofing here rises ahead of and after hurricane season, which runs June 1 through November 30, and installation is generally most comfortable and reliable in the cooler, drier months from roughly November through April. If your roof is already showing problems, it is better to start the quote and permit process before the summer thunderstorm pattern sets in rather than during it. Call (954) 775-8990 or request an estimate with the form on this page — the phone is answered around the clock, and the Sunrise office keeps weekday hours, Monday to Friday, 8am to 6pm.
We work in Boulevard Gardens and surrounding Broward areas including Washington Park, Franklin Park, Roosevelt Gardens, Rock Island, Lauderdale Manors, Broadview Park, Melrose Park, Dorsey-Riverbend, Golden Heights, the Sistrunk Boulevard corridor and Oakland Park, as well as Fort Lauderdale, Lauderdale Lakes, Lauderhill, Plantation, Wilton Manors, Sunrise and North Lauderdale.
Metal Roof in Boulevard Gardens: questions we hear
- Do I need a permit for a metal roof in Boulevard Gardens?
- A permit from the local building department is typically required, with inspections for deck condition, fastening and dry-in. We pull permits under our own license, schedule the inspections, and close the permit out when the work passes.
- Does the High-Velocity Hurricane Zone apply here?
- Yes — Boulevard Gardens is in Broward County, which along with Miami-Dade makes up the High-Velocity Hurricane Zone. Metal roof systems need Florida Product Approval, and Miami-Dade NOAs are commonly required in the HVHZ, so verify the specific approval with the Broward building department.
- Will a metal roof corrode this close to the coast?
- Boulevard Gardens sits about five miles inland from the Atlantic and still sees salt-laden air and relentless humidity. Material selection and fastener compatibility matter for corrosion resistance, which is why aluminum and galvalume finished for coastal exposure are specified for this kind of environment.
- My house is from the 1950s with a shallow roof — can it take metal?
- Many homes in this community date from the 1940s through the 1960s with low-slope or shallow-gable roofs, and panel type and underlayment have to suit the actual pitch. We check deck condition during the estimate and include rotten plywood and fascia replacement in the scope.
- Do I have to use a licensed contractor?
- Metal roofing is roofing work and generally requires a DBPR-licensed roofing contractor in Florida. Our certification, CCC1334537, is a state certification valid in every Florida county and can be verified on the DBPR website.
Get a free metal roof quote in Boulevard Gardens
Tell us what's going on. A state-certified contractor will get back to you.